Skip to main content
Frata Ingenieros

BVBS Export

Export your Revit rebar to a BVBS file (.abs), the German standard that bar bending machines and bending software read.

General Description

BVBS Export reads the shape of each selected rebar, converts it to the BVBS 3.1 format (plane shapes BF2D, spatial shapes BF3D) and writes one line per unique bar shape. The first fields of every line (project, plan, index, bar mark, steel grade and group) are filled from the Revit parameters you choose, so each bar can be traced back to its level, sector and element.

Key Features

  • Loads the rebar you have selected, or asks you to pick it. The grid shows each rebar's Mark, Shape, Diameter (mm), the shape dimensions (A, B, C...), Bars, BVBS lines, Status and Notes. The shape dimensions are only there to help you review: they are not exported.
  • Header fields lets you choose, for each BVBS header field, which parameters fill it and in what order. A field can combine several parameters and fixed text (for example PR sector, a space and PO element). Your choice is remembered.
  • Location data (optional): in Header fields you can add named fields, such as Level or Sector, filled from parameters, and write them in the private block (P) of every line as name=value. The standard provides that block for company or project data. It is off by default because your bending software must accept it.
  • Hooks are exported as legs of the bar, and leg lengths are written as outer dimensions, as the standard requires.
  • A rebar set whose bars have different shapes (for example stirrups on a tapered beam) is split into one line per shape, each with the number of identical bars.
  • Rebar that cannot be fully described is written with its header only and listed, so nothing disappears silently.

How to Use

  1. Select the rebar in the model, then click BVBS Export. If nothing is selected, Revit asks you to pick rebar: Select the rebar to export, then click Finish.
  2. Review the grid. Click Select rebar to load the rebar currently selected in Revit; when nothing is selected, Revit asks you to pick rebar.
  3. Click Header fields. For each field (Project (j), Plan (r), Index (i), Bar mark (p), Steel grade (g), Group (c)) use Add parameter to pick a parameter, Add text to add fixed text, and the arrows to reorder the pieces. Click Save.
  4. Check the Status column. Rows marked Warning, Header only or Skipped explain the reason in Notes.
  5. Optional: in Header fields, turn on Write the private block, click Add location field, type a field name and pick the parameters that give its value.
  6. Click Export BVBS and choose the file name. When some rebar had problems, a summary offers a table with each rebar and its reason. When the file is written you can open it with Open file.

Notes

  • The tool does not modify the model.
  • The file follows the BVBS guideline version 3.1: ASCII text, lengths in mm, weights in kg, angles in degrees, a checksum at the end of every line and CRLF line endings.
  • A text value containing the character @ cannot be written (it is the BVBS field separator); that rebar is skipped and reported.
  • The bending mandrel is read from the bar type's bend diameter, or set to four bar diameters when the type has none.
  • The bar weight is calculated from the sum of the outer legs and the nominal weight of the diameter.
  • A private block is part of the standard, and a program that does not know it should ignore it, but not every program does. Test one import before relying on it.
  • The first bend of each bar is written with a negative angle.
BIMtools privacy policy